HARDNESS PEN

Voltar as marcas

Partilhar

HARDNESS PEN

Categorias: Hardness,

Etiquetas: AS 3894.4, DIN 55656, EN 438-2, ISO 1518, SIS 184188

Descrição

The TQC Hardness Pen is a pocket instrument for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics or related products. A tungsten carbide tip is drawn over the surface with a defined constant pressure. The pressure on the tip can be changed using the slide or by changing the spring. A visual mark on the surface after use of the TQC Hardness Pen indicates a fail of the surface hardness or wear/scratch resistance. Can be used on flat and curved surfaces. There are 2 versions available, the Standard and Pro. The Standard version is supplied with 3 springs and one tip: 0-3N, graduation 10 g 0-10N, graduation 50 g 0-30N, graduation 150 g Tip 1mm The Pro version includes the above as well as: Tip 0,5mm Tip 0,75mm Pen holder with guidance wheels, which provides very stable load on tip and makes it easier to apply force. The laser-engraved scale is clearly visible on the grey background. STANDARDS According DIN 55656 Results can be obtained equal to: ISO 1518; AS 3894.4; EN 438-2, SIS 184188, and Corporated Standards Bosch, Volvo, Opel, van Laar. MODELS AVAILABLE TO ORDER

Hardness pen - Standard (SP0010)

Supplied with 3 springs and one 1 mm tip: Tips of Ø 0,75mm (Bosch) and Ø 0,5 mm (van Laar) are optional.

Hardness pen - Pro (SP0015)

Supplied with 3 springs and 3 tips:, Includes Pen holder with guidance wheels, which provides very stable load on tip and makes it easier to apply force.

ACCESSORIES
	SP0022 Spring 0- 3000g. graduation 150g.
	SP0021 Spring 0- 1000g. graduation 50g.
	SP0020 Spring 0- 300g. graduation 10g.
	SP0014 Tip for hardness testDiameter: 1 mm
	SP0013 Tip for hardness test Diameter 0.75 mm / R=0,375
	SP0012 Tip for hardness testDiameter 0.5 mm / R=0,25

DOWNLOAD Datasheet HARDNESS PEN